If your PC keeps showing “Automatic Repair couldn’t repair your PC” or “Startup Repair couldn’t repair your PC,” you’re likely stuck in the Windows Automatic Repair Loop. This can happen in Windows 10 and 11 due to hardware issues, registry changes, CPU overload, or other system problems. Follow these five steps to get your PC running again.

Step 1: Run Essential Repair Commands

The first and most effective way to fix the repair loop is to use the Command Prompt to repair system files and the boot configuration. Follow these steps:

  1. On the blue error screen, select Advanced Options > Troubleshoot > Advanced Options > Command Prompt.
  2. Type sfc /scannow and press Enter to scan and repair system files.
  3. Type bootrec /fixmbr and press Enter to repair the Master Boot Record.
  4. Type bootrec /rebuildbcd and press Enter to rebuild the Boot Configuration Data.
  5. Type chkdsk /f /r (replace C with your system drive letter if needed) and press Enter to scan and fix drive errors.
  6. Type exit and select Continue to restart your PC.

Step 2: Uninstall Recent Updates or Use Safe Mode

Sometimes the repair loop begins after installing Windows updates or new software. Uninstalling these updates can help. Follow these steps:

  1. Go to Advanced Options > Troubleshoot > Advanced Options > Uninstall Updates.
  2. Start by uninstalling the latest quality update. If the problem persists, uninstall the latest feature update.
  3. If needed, restart into Safe Mode with Networking: go to Startup Settings > Restart, then press F5.
  4. In Safe Mode, uninstall any recent updates or software via Control Panel > Programs and Features > View installed updates.
READ
Best Movie Streaming Software for 2026: 10 Best Apps to Organize and Stream Your Media Library

Step 3: Use System Restore

System Restore allows you to roll back your PC to a previous state. If you have a restore point from when your PC was working correctly, this can be a safe and easy solution.

  1. Navigate to Advanced Options > Troubleshoot > Advanced Options > System Restore.
  2. Select a restore point from a time when your PC was functioning properly.
  3. Follow the on-screen instructions to restore your system.

Step 4: Perform a Power Drain

A power drain (or power reset) can fix hardware-related issues caused by static electricity buildup on the motherboard.

For Desktops:

  1. Shut down the PC completely and unplug the power cable and all peripherals.
  2. Press and hold the power button for 25–30 seconds.
  3. Reconnect everything and turn on the PC.

For Laptops:

  1. Unplug the charger and remove the battery if possible.
  2. Disconnect all external devices and hold the power button for 25–30 seconds.
  3. Reinsert the battery, reconnect the charger, and start the laptop.

Step 5: Reset or Reinstall Windows

If none of the previous steps work, you can reset or reinstall Windows.


Buy ExpressVPN with PayPal or Credit Card
  1. Go to Advanced Options > Troubleshoot > Reset this PC.
  2. Choose Keep my files to save personal data or Remove everything for a fresh start.
  3. Select Local reinstall to begin the process.
  4. If the reset fails, perform a clean reinstallation of Windows as the final step.

Following these steps should help you escape the Windows Automatic Repair Loop and get your PC running normally again.

READ
What Is ChatGPT Live? Everything You Need to Know About OpenAI's New Real-Time Voice Experience
Advertisement