How To Remove Write Protection From USB Drives and Memory Cards
Sometimes you’ll find that it’s impossible to format, delete or copy new files to an SD card or USB flash drive. Windows will tell you that it is write-protected, even though there is no ‘lock’ switch or – if there is – you’ve made sure the switch is set correctly to allow files to be written to the drive.
But just in case this switch is news to you, it is well worth checking that your device has the switch set to ‘unlocked’. When set to ‘locked’ you won’t be able to copy any new files onto the memory card or USB stick, and it also stops you from accidentally formatting it.
You’ll still be able to view files that are already stored on the drive, but you can’t delete them (they sometimes seem to delete OK, but the next time you check, there they are again!).
But if this isn’t the problem, you might still be able to fix things and continue to use your USB flash drive or SD card – we’ll explain how. Unfortunately, in some cases, the device may be corrupt or physically broken and no tricks or software will make it work again. The only solution, in this case, is to buy a new drive.
In any version of Windows from XP onwards, run.
If you’re not sure how to find it, searching ‘regedit’ in the Start menu will usually show the program at the top of the list.
It’s a bit like File Explorer, so use the pane on the left to navigate to the following key:
Note: if you can’t find StorageDevicePolicies, see the next step.
Double-click on the WriteProtect value in the right-hand pane. You can now change the Value data from 1 to 0. Then click OK to save the change. Close Regedit and restart your computer. Connect your USB drive again and, with a bit of luck, you should find it is no longer write-protected.
You can now continue to use the drive, but it’s worth copying off any files you want to keep and then formatting it by right-clicking on it in the list of drives in File Explorer and choosing Format.
If you can’t find StorageDevicePolicies, you can create it by right-clicking in the white space in the ‘Control’ folder and choosing New -> Key and entering the name StorageDevicePolicies.
Now double-click on the new key (it will show as a folder) and right-click once again in the white space and choose New -> DWORD. Name this WriteProtect and set its value to 0. Click OK, exit Regedit and reboot your computer.
If this method doesn’t work, go to the next step.
With your USB drive or memory card attached to your computer, launch a command prompt. You can do this by searching foror ‘Command Prompt’ in the Start menu.
Note: you may need to runwith administrator privileges if you see an “access is denied” message. To do this, right-click on Command Prompt in the Start menu and choose ‘Run as administrator’ from the menu that appears.
If you have Windows 10, simply right-click on the Start button (bottom left of the screen) and choose Command Prompt (admin).
Now, at the prompt, type the following and press Enter after each command:
select disk x (where x is the number of your non-working drive – use the capacity to work out which one it is)
attributes disk clear readonly
create partition primary
format fs=fat32 (you can swap fat32 for ntfs if you only need to use the drive with Windows computers)
exit. That’s it. Your drive should now work as normal in File Explorer. If it doesn’t, it’s bad news and there’s nothing more to be done. Your stick or memory card is scrap and fit only for the bin. But the good news is that storage is cheap, and you can get a great microSD card for next to nothing.